Lifestyle

Everything you need to know about aluminum radiators

Statistics in the public domain prove beyond all doubt that most radiators sold around the world, including and especially Ireland, are made of mild steel. That being said, it must be noted that in the past couple of years, there has been a substantial increase in the manufacture of aluminum radiators made from stainless steel and aluminum.


Why does aluminum shape to be the best choice for making radiators?


When it comes to radiators, aluminum seems to the best possible choice because it allows for considerable energy savings. There are many reasons for this but the most important reason is that aluminum is very efficient in conducting heat. Because of aluminum’s thermal conductivity being 4-5 times that of mild steel, aluminum is often used as a heat sink in computers to large industry.


What are the different benefits of using aluminum radiators?
There are a lot of benefits of using aluminum radiators in Dublin over other types of radiators, including and especially steel radiators. It has been seen that aluminum radiators in Dublin are able to transfer the heat from the water to the air a lot faster than steel radiators. What this goes on to show is that aluminum radiators in Dublin will be requiring a lot less heated water from the boiler.


This also goes on to prove that aluminum radiators in Dublin will be comparatively a lot quicker in responding to the different changes in the requirement of the room heat and temperature. This is one of the most significant benefits of using aluminum radiators in Dublin because this proves that aluminum radiators in Dublin can substantially reduce any and all types of wasted heat.


The aluminum radiators Dublin are comparatively a relatively newer introduction in the Irish market thus it is pretty difficult to find conclusive and undeniable data about the energy savings that can be availed by using aluminum radiators Dublin. That being said, there have been some statistics in the public domain that prove that using aluminum radiators in Dublin can reduce around 5-10% of your annual heating bills.


What explains the extensive usage of aluminum radiators?


That’s not all, aluminum radiators in Dublin also seem to be extensively used because of the multitudes of environmental benefits that can be availed from their usage. This is mainly because aluminum radiators in Dublin are made from recycled material.

Further, it has been seen that aluminum radiators in Dublin tend to have a very low water content which means that they are comparatively a lot less small than other radiators that are made of mild steel and stainless steel. This ensures that aluminum radiators in Dublin can prove to be pretty useful if and when they are used with heating systems of a low temperature like ground source heat pumps. If and when you begin using aluminum radiators in Dublin, you will no longer need larger radiators to make up for lower water temperatures.

If aluminum is good then why are radiators made from other materials?
All of these facts in favor of aluminum radiators in Dublin begs the question that why aren’t all radiators in the market made from aluminum, and what’s the point of making radiators from other materials like mild steel and stainless steel!

This is mainly because aluminum (despite its multitudes of benefits) happens to be weaker and less flexible than steel and that’s the main reason for the extensive manufacture of aluminum radiators in Dublin in straight profiles. Since aluminum radiators Dublin can’t be made in straight profiles there are plenty of limitations in radiator designs which means that loops and bends in aluminum radiators Dublin are just not possible. One very important thing that you must note before installing aluminum radiators Dublin on a heating system is that you should always try to use a mixed system inhibitor.


The Bottom Line


There you have it, that was everything you needed to know about aluminum radiators. Radiators are made from many different types of materials like wood, stone, cast iron, and steel but aluminum shapes up to be the best material for making radiators because of the many benefits that can be availed from the usage of aluminum radiators. Over the past couple of years, there has been a significant increase in the demand, usage, and popularity of aluminum radiators, and even if they happen to be a little expensive than other radiators, it makes sense to buy them because they happen to be a value-for-money product.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button